TRIO Flatmount High Performance 12V Conversion Box For Aftermarket Router
TRIO Flatmount High Performance 12V Conversion Box For Aftermarket Router
The HP 12V Conversion box contains TRIO's POE injector and 12-56V converter inside to allow plug and play use with an aftermarket router like Peplink or GliNet (not included). This eliminates the need to use the HP router in addition to your existing aftermarket router which results in ~10% power savings not including inverter inefficiencies.
Simply connect the included 5’ SAE cable to a 12V or 24V power source (DC input range is 10-30V) and plug in your High Performance Dish’s Starlink ethernet cable into the port labeled DISH - no cable cutting or crimping required!
*Works with snowmelt! The POE and converter are rated for 320W which is more than enough for Gen 3 snowmelt.
Power Consumption tested over 1 hour with constant upload/download internet: ~83 Wh (6A at 13.8V) - not including aftermarket router power consumption which will vary depending on your specific model.
Please select the appropriate connector for your application from the drop down: bare wire leads or ring terminals.
*It is recommended to use a 30A fuse on your 12V fuse block or adding an in-line fuse on the positive lead.
Original: $465.48
-65%$465.48
$162.92Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
TRIO Flatmount High Performance 12V Conversion Box For Aftermarket Router
The HP 12V Conversion box contains TRIO's POE injector and 12-56V converter inside to allow plug and play use with an aftermarket router like Peplink or GliNet (not included). This eliminates the need to use the HP router in addition to your existing aftermarket router which results in ~10% power savings not including inverter inefficiencies.
Simply connect the included 5’ SAE cable to a 12V or 24V power source (DC input range is 10-30V) and plug in your High Performance Dish’s Starlink ethernet cable into the port labeled DISH - no cable cutting or crimping required!
*Works with snowmelt! The POE and converter are rated for 320W which is more than enough for Gen 3 snowmelt.
Power Consumption tested over 1 hour with constant upload/download internet: ~83 Wh (6A at 13.8V) - not including aftermarket router power consumption which will vary depending on your specific model.
Please select the appropriate connector for your application from the drop down: bare wire leads or ring terminals.
*It is recommended to use a 30A fuse on your 12V fuse block or adding an in-line fuse on the positive lead.
