TRIO Flatmount Gen 3 12V Power Supply
TRIO Flatmount Gen 3 12V Power Supply
This Gen 3 12V power supply plugs directly into the Gen 3 Starlink Router. This eliminates the wasted idle draw of powering it through a large inverter (30-50 watts waste for a 3000W inverter!).
Simply unplug the 110V Starlink power supply and plug in our 336W power supply and connect it to a 12V OR 24V power source (Input voltage range is 10-30V). TRIO's converter boosts this to the 56V that the Gen 3 router and dish need.
To eliminate any concern about ripple voltage (and subsequent drop outs and/or reduced speeds), a capacitor was installed as well as the appropriate barrel connector that works seamlessly with the Starlink Gen 3 router.
Power Consumption tested over 1 hour with constant upload/download internet: 63 Wh (4.5A at 13.8V).
*Note: Using snow melt function draws an additional 120W andĀ cannot be used with cigarette lighter plugĀ as most vehicles have a 10A limit.
*If wanting to extend the barrel connector length, we recommend adding a barrel connector extension.
Please select the appropriate connector for your application from the drop down: bare wire leads, ring terminals, or cigarette lighter plug (must be 15A or greater cig plug).
Original: $104.73
-65%$104.73
$36.66Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
TRIO Flatmount Gen 3 12V Power Supply
This Gen 3 12V power supply plugs directly into the Gen 3 Starlink Router. This eliminates the wasted idle draw of powering it through a large inverter (30-50 watts waste for a 3000W inverter!).
Simply unplug the 110V Starlink power supply and plug in our 336W power supply and connect it to a 12V OR 24V power source (Input voltage range is 10-30V). TRIO's converter boosts this to the 56V that the Gen 3 router and dish need.
To eliminate any concern about ripple voltage (and subsequent drop outs and/or reduced speeds), a capacitor was installed as well as the appropriate barrel connector that works seamlessly with the Starlink Gen 3 router.
Power Consumption tested over 1 hour with constant upload/download internet: 63 Wh (4.5A at 13.8V).
*Note: Using snow melt function draws an additional 120W andĀ cannot be used with cigarette lighter plugĀ as most vehicles have a 10A limit.
*If wanting to extend the barrel connector length, we recommend adding a barrel connector extension.
Please select the appropriate connector for your application from the drop down: bare wire leads, ring terminals, or cigarette lighter plug (must be 15A or greater cig plug).
