PowerTrays Powerswitch PowerTray Standoff
PowerTrays Powerswitch PowerTray Standoff
The original Powerswitch PowerTray just got even better. Introducing a new, more universal mounting option that can be installed onto any flat surface.
The Standoff Garmin Powerswitch PowerTray was designed as a universal style mount for any vehicle or camper build you want.
It also works great for Toyota’s that have something obstructing the usual PowerTray location. For example, many manual transmission Tacoma's and FJ's have a clutch fluid reservoir mounted right where the PowerTray traditionally installs. For these models this tray works really well if you mount it to the top of the OE fuse block cover. The beautiful thing about mounting it on top of the factory fuse block is the OE fuses and relays can still be accessed if needed without any tools.
The exterior dimensions are 11.29" x 6.09".
Features:
- Black Powder Coat Finish - PowerTrays uses a high quality fine textured black powder coat to match your other accessories.
-
PEM® Fasteners with Stainless Steel Screws - Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.
- 1/8th Inch 5052 Aircraft Aluminum - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.
- Waterjet manufacturing - Guarantees precise cuts with an accuracy of ±0.003", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
- Chamfered edges - To avoid sharp edges PowerTrays chamfers all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.
-
Universal fit - Designed to mount to any flat surface such as firewalls, fuse block lids, and battery boxes.
-
Unparalleled stability - Utilizing four points of contact, you can be sure that your valuable electronics are safe and supported. Included are 4 easy to install counter sunk screws with aluminum spacers and nuts.
-
High Quality Stainless Steel Hardware - Stainless steel flush mount hardware allows the mounting screws to sit flush on the tray which is hidden by the accessories.
- Premium Aluminum Spacers - Also included are half inch aluminum spacers which has 3M adhesive applied to one side. Allowing the spacer to stick to the tray for the those harder to reach install locations.
Original: $165.61
-65%$165.61
$57.96Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PowerTrays Powerswitch PowerTray Standoff
The original Powerswitch PowerTray just got even better. Introducing a new, more universal mounting option that can be installed onto any flat surface.
The Standoff Garmin Powerswitch PowerTray was designed as a universal style mount for any vehicle or camper build you want.
It also works great for Toyota’s that have something obstructing the usual PowerTray location. For example, many manual transmission Tacoma's and FJ's have a clutch fluid reservoir mounted right where the PowerTray traditionally installs. For these models this tray works really well if you mount it to the top of the OE fuse block cover. The beautiful thing about mounting it on top of the factory fuse block is the OE fuses and relays can still be accessed if needed without any tools.
The exterior dimensions are 11.29" x 6.09".
Features:
- Black Powder Coat Finish - PowerTrays uses a high quality fine textured black powder coat to match your other accessories.
-
PEM® Fasteners with Stainless Steel Screws - Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.
- 1/8th Inch 5052 Aircraft Aluminum - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.
- Waterjet manufacturing - Guarantees precise cuts with an accuracy of ±0.003", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
- Chamfered edges - To avoid sharp edges PowerTrays chamfers all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.
-
Universal fit - Designed to mount to any flat surface such as firewalls, fuse block lids, and battery boxes.
-
Unparalleled stability - Utilizing four points of contact, you can be sure that your valuable electronics are safe and supported. Included are 4 easy to install counter sunk screws with aluminum spacers and nuts.
-
High Quality Stainless Steel Hardware - Stainless steel flush mount hardware allows the mounting screws to sit flush on the tray which is hidden by the accessories.
- Premium Aluminum Spacers - Also included are half inch aluminum spacers which has 3M adhesive applied to one side. Allowing the spacer to stick to the tray for the those harder to reach install locations.
